Walls and Roof

Subslab assembly

No added insulation as yet - 2" planned

Foundation wall assembly

The basement walls were insulated with three inches of polyiso foam.

Foundation wall R-value 18.0
Above grade wall assembly

Walls are 8-1/2 inches, filled with water-blown spray foam, three inches of closed cell, then open cell.

Above grade wall R-value 32.0
Roof Assembly

The roof is 12-1/4 inches, filled with water-blown spray foam, three inches of closed cell, then open cell.

Roof R-value 44.0

Windows and Doors

Window Assembly:

Windows are Alpens with foam in the hollow fiberglass pultrusion. Half the glazing faces south. Casements/awnings have triple, SHGC 0.59 argon-filled glazing with two Cardinal 180 low-e coatings – the NFRC U value is 0.18. South-facing fixed windows have a low- iron outer pane to bump the SHGC to 0.62; U value is 0.16. The skylight is a Wasco with similar triple glazing.

Door Assembly:

Doors are foam-filled fiberglass with double low-e argon-filled glazing which will be replaced with high R value glazing.

Average window U-factor 0.18
Solar Heat Gain Coefficient 0.59

Mechanical Systems

Space cooling - Manufacturer & Model Fujitsu heat pump
Space heating - Manufacturer & Model Fujitsu heat pump AOU9RLFC / ARU9RLF ducted single zone heat pump
Domestic hot water - Manufacturer & Model Stiebel Eltron HPWH
Domestic hot water - capacity 80 gal
Ventilation - Manufacturer & Model Zehnder ComfoAir 200
Lighting Manufacturer and Model LED Green Creative
Lighting Efficiency
Mechanical Equipment Installation Details and Comments

Duct Blaster test 27 CFM25