Hannah Durschlag's picture

Modeling: Proceed With Caution

by Hannah Durschlag

BuildingEnergy 16 Full Conference
Tuesday, January 19, 2016

Every year at the BuildingEnergy Boston Conference + Trade Show, there are several presentations related to computer simulation. We model energy, air currents, heat, and moisture to reconcile design decisions with intended use. Advancements in modeling have given us a new way to view buildings and an opportunity to build better ones. However, each presentation on this topic calls to mind the often repeated saying “garbage in, garbage out”.

What is the computer assuming? Is the entered data accurate? Are we capturing the accuracy of our data in the model? What value do we assign the modeled result?

I was reminded of the importance of modeling accuracy when investigating the thermal behavior of composite walls on a past project, specifically the relationship between the as-tested and modeled results. The models were used to determine the location within the wall where water will condense: a hygrothermal analysis to address the optimal type and position of the vapor control layer. Lessons learned from the as-tested physical model were different from those of the computer generated model. This raised the question: what is the best way to make the modeled results more compatible with the empirical ones?

I am hoping to hear related commentary at two BuildingEnergy Boston presentations this year, both relying and focusing on modeling. The first is called “Break It or Lose It: Thermal Bridging in Building Envelopes”, which discusses the R-value evaluation of as-built wall systems, compared to the designed R-value. The presenters claim that up to 70% less R-value was observed than intended. However, this is relying on the design R-value, which is a model. It may be a simple model, aggregating the R-values of the wall components one dimensionally, or it may be a more complex two dimensional model.

Either way, the question remains: “was the wall truly so much worse than the model – or was the model bad?”

I’m looking forward to understanding how the presenters deal with this question, and their recommendations. Are they advocating changing our modeling techniques as well as our building techniques? If so, what physical considerations are our models not incorporating? What is the bias? Or are we entering “bad data”?

Another presentation related to modeling is called “A Prototype Visualization Tool for Hygrothermal Analysis”, which discusses a tool that the creators claim can analyze risk of mold growth and building component failure. What I would like to understand following this presentation is how the creators represent the accuracy of their results. Is a probability associated with this analysis? Is this probability based on the accuracy of the information entered or physical phenomena that are always at work? I’m looking forward to hearing how the creators dealt with the inaccuracies inherent in our work on buildings.

One thing is for sure, modeling is to be deployed with care, caution, and experience. Everyone at BuildingEnergy Boston is interested in progress, and not assuming what we’re doing is enough. The presentations discussed here push the envelope and add to our knowledge, and I’m very excited to attend. I hope to see you there, as well!

Our Mission

NESEA advances sustainability practices in the built environment by cultivating a cross-disciplinary community where practitioners are encouraged to share, collaborate and learn.

Hannah Durschlag has experience assessing the condition, insulation, airtightness, and water penetration resistance of existing structures as well as in peer review for new building enclosure design. She has assisted in projects ranging from large-scale air leakage testing research to drawing reviews, in addition to thermal and hygrothermal computer modeling.

Hannah is currently an enclosure consultant at Vidaris, Inc. Prior to joining Vidaris, Ms. Durschlag was an associate at Wiss, Janney, Elstner Associates. She has a degree in civil engineering from Northwestern University and a...

Hannah Durschlag's picture
BuildingEnergy 16 Full Conference

Add comment

Log in or register to post comments

Recent Posts

Florence MacGregor's picture

administratorBE Boston 21 RegistrantsBE Boston 22 RegistrantsBE Boston 23 RegistrantsBE Boston 24 RegistrantsBE NYC 19 RegistrantsBE NYC 20 RegistrantsBE NYC 21 RegistrantsBE NYC 22 RegistrantsBE NYC 23 RegistrantsBottom Lines - FacilitatorBottom Lines - Steering CommitteeBuildingEnergy 16 Full ConferenceBusiness Membercontent admincontent editorMember

03/06/2024 - 08:13

Andrea Mancino's picture

BE Boston 20 RegistrantsBE Boston 21 RegistrantsBE Boston 23 RegistrantsBE NYC 19 RegistrantsBE NYC 20 RegistrantsBE NYC 21 RegistrantsBE NYC 22 RegistrantsBE NYC 23 RegistrantsBoard MemberBusiness MemberMember

02/12/2024 - 12:37

Henry MacLean's picture

BE Boston 19 RegistrantsBE Boston 20 RegistrantsBE Boston 21 RegistrantsBE Boston 22 RegistrantsBE Boston 23 RegistrantsBusiness MemberCompany Record ManagerGreen Company ManagerMember

09/11/2023 - 19:53

Pages