Lakeridge Trail
Net Zero Home with Fuentes Design
Project Photo Gallery
Project Team
Ratings, Awards and Recognition
When we purchased our home in Lake of the Pines, we did so for the location, not for the house. The crazy 1975 design included 2 oversized gas furnaces that short-cycled so often the house would never get warm. Access to one was through a 20"x20" hole in the foundation wall four feet above the basement floor, while the other, located next to the master bedroom, sounded like an airplane taking off every time it came on. Most of the windows were single-pane and leaky, and most of the beautiful view of the lake through them was blocked by a catwalk. With ants and wasps living year round in the roof, not to mention rodents showing up every few months in the basement, we had no intention of tolerating the status quo.
Our passion for energy efficiency and sustainability led us to Brian Fuentes of Fuentesdesign Architecture. He had been refurbishing houses according to his Passivhaus training thoughout the Boulder, CO area for ten years, and he had been getting many requests for proposals due to the need for rebuilding after the Northern Colorado flood of Sept. 12, 2013. So we felt lucky when he decided to take on scraping and rebuilding our home to net zero standards.
We knew we wanted to take advantage of our dramatic views of Allens Lake and the eastern plains of Colorado, and to let the outdoors in without compromising our netzero goal. We were delighted to learn about Zola windows, and incorporated many floor-to-ceiling windows including a 16 foot sliding door. All the windows are triple pane and highly efficient, providing natural light to all living spaces. Brian led us on an exciting path of discovery and design, including a very tight envelope, a ground source heatpump leveraging three geothermal wells for heating cooling and domestic water heat. We leveraged a variety of insulation layers, a high-impact/wind resistent efficient roof, energy efficient appliances, water efficient low-flow toilets and fixtures, and beautiful finishes featuring sustainbly sourced acacia hardwood floors, natural fiber carpets, LED lighting throughout, and beetle-killed pine ceilings. In addition, the garage includes a 220V outlet for EV charging (when we get one!). We also reduced our own square footage while maintaining our property value by converting the basement into a separate efficiency-style apartment with an amazing view to be used as a rental or for an aging parent or caretaker. We decided to include a larger solar array than strictly needed, so we feel better about our use of appliances, including a hot tub and steam shower!
The result is stunning. We relish each sunrise, the bright open spaces, the quiet interior, and the consistent draft-free year-round comfortable temperatures. Consequently, we hope that our home can be a model for other net zero homes in the state of Colorado and elsewhere.
Quick Facts
General
Location
Boulder, Colorado
Building Type
single-family residence
Project Type
Zero Energy
Basis of Performance Claim
Modeled
Bedrooms
4
Bathrooms
4.0
Conditioned Floor Area
3,820 sq ft
Total Cost of Project
$995,000
Energy Summary
Energy Data Type
Modeled
Renewable Energy System Type(s)
Photovoltaics
Ratings
HERS Index
-4
Net electricity usage (purchased)
-1,586 kWh/year
Annual renewable energy generated
14,200 kWh/year
Envelope and Mechanicals
Subslab assembly
Over existing garage slab was a vapor barrier followed by 12" EPS then conventional floor framing bearing on existing walls, R 52. Existing sloped crawlspaces 3" ccsf (R20) over vapor barrier on ground. There was an existing basement slab that remained uninsulated of 723 sf.
Foundation wall assembly
basement walls 4" polyiso against concrete with dense pack cellulose in 2x4 interior stud cavity
Above grade wall assembly
Remodel/new construction 4" polyiso nailbase over 2x6 OVE 24" O.C. framing with netted and blown cellulose
Door Assembly
Zola Thermoclad
Air Changes per hour, ACH50
0.49 ACH50
Project Photo Gallery
Project Team
Ratings, Awards and Recognition
When we purchased our home in Lake of the Pines, we did so for the location, not for the house. The crazy 1975 design included 2 oversized gas furnaces that short-cycled so often the house would never get warm. Access to one was through a 20"x20" hole in the foundation wall four feet above the basement floor, while the other, located next to the master bedroom, sounded like an airplane taking off every time it came on. Most of the windows were single-pane and leaky, and most of the beautiful view of the lake through them was blocked by a catwalk. With ants and wasps living year round in the roof, not to mention rodents showing up every few months in the basement, we had no intention of tolerating the status quo.
Our passion for energy efficiency and sustainability led us to Brian Fuentes of Fuentesdesign Architecture. He had been refurbishing houses according to his Passivhaus training thoughout the Boulder, CO area for ten years, and he had been getting many requests for proposals due to the need for rebuilding after the Northern Colorado flood of Sept. 12, 2013. So we felt lucky when he decided to take on scraping and rebuilding our home to net zero standards.
We knew we wanted to take advantage of our dramatic views of Allens Lake and the eastern plains of Colorado, and to let the outdoors in without compromising our netzero goal. We were delighted to learn about Zola windows, and incorporated many floor-to-ceiling windows including a 16 foot sliding door. All the windows are triple pane and highly efficient, providing natural light to all living spaces. Brian led us on an exciting path of discovery and design, including a very tight envelope, a ground source heatpump leveraging three geothermal wells for heating cooling and domestic water heat. We leveraged a variety of insulation layers, a high-impact/wind resistent efficient roof, energy efficient appliances, water efficient low-flow toilets and fixtures, and beautiful finishes featuring sustainbly sourced acacia hardwood floors, natural fiber carpets, LED lighting throughout, and beetle-killed pine ceilings. In addition, the garage includes a 220V outlet for EV charging (when we get one!). We also reduced our own square footage while maintaining our property value by converting the basement into a separate efficiency-style apartment with an amazing view to be used as a rental or for an aging parent or caretaker. We decided to include a larger solar array than strictly needed, so we feel better about our use of appliances, including a hot tub and steam shower!
The result is stunning. We relish each sunrise, the bright open spaces, the quiet interior, and the consistent draft-free year-round comfortable temperatures. Consequently, we hope that our home can be a model for other net zero homes in the state of Colorado and elsewhere.
Quick Facts
General
Location | Boulder, Colorado |
---|---|
Building Type | single-family residence |
Project Type | Zero Energy |
Basis of Performance Claim | Modeled |
Bedrooms | 4 |
Bathrooms | 4.0 |
Conditioned Floor Area | 3,820 sq ft |
Total Cost of Project | $995,000 |
Energy Summary
Energy Data Type | Modeled |
---|---|
Renewable Energy System Type(s) | Photovoltaics |
Ratings | |
HERS Index | -4 |
Net electricity usage (purchased) | -1,586 kWh/year |
Annual renewable energy generated | 14,200 kWh/year |
Envelope and Mechanicals
Subslab assembly |
Over existing garage slab was a vapor barrier followed by 12" EPS then conventional floor framing bearing on existing walls, R 52. Existing sloped crawlspaces 3" ccsf (R20) over vapor barrier on ground. There was an existing basement slab that remained uninsulated of 723 sf. |
---|---|
Foundation wall assembly |
basement walls 4" polyiso against concrete with dense pack cellulose in 2x4 interior stud cavity |
Above grade wall assembly |
Remodel/new construction 4" polyiso nailbase over 2x6 OVE 24" O.C. framing with netted and blown cellulose |
Door Assembly |
Zola Thermoclad |
Air Changes per hour, ACH50 | 0.49 ACH50 |